WATER FILTER UAE

                                                          WATER FILTER UAE
                                       Contact.  +971551630392 . Muhammad Ali

To make residential water cleaner, clearer and better tasting for the entire home, 3M Aqua-Pure products offer an extensive line of water filtration products.Primarily, these products are designed to make hard water soft. Hard water tends to be more common in inner city areas or places where there is often hot weather, low rainfall and a high mineral content in the soil.

You will know if your water is hard because you’ll find those horrid white deposits inside your dishwasher or other appliances that use water. If you’re not sure just take a look inside your kettle. If the element is covered in something that looks like dirty wet chalk, the chances are you have hard water.

Hard water contains two main elements: Magnesium and Calcium.
These are what cause the build-up of what’s known as lime-scale on all your surfaces and inside your pipes, so these are the elements water softeners treat.

Water softeners work in two ways.

1. They will completely remove both of these elements before water is run through your system.
   These are the salt-based water softeners.
2. They will neutralize these elements by way of electro-magnetic waves before the water comes out of your faucet.
   Since these do not completely eliminate the hardness minerals from the water, they are also called water conditioners. However, for most applications these will do.

You can find more information about the two different types here but in both cases the end result is softer water that leaves little or no residue behind, which helps prolong the life of your appliances and the plumbing in your home. You will probably find it tastes different as well.

                                   
Improve your drinking water with our under sink and in-line water filter products and also help protect your plumbing in your home with our whole house water filter products
Cleaner, clearer, better tasting water is a critical element to your operations. It can help protect your equipment and aid in producing a quality beverage. With our broad line of products, we are here to provide you with a solution to meet your water filtration challenges.

These systems are a different ball game altogether. There are various technologies on the market used to remove contaminants in your water, and there is a whole host of them that could be hiding in that glass you’ve just poured from your faucet. If you’re interested in finding out more about these, take a look at.....

Again, it does depend on where you live. Those of you that have your water sourced from a well may well need a more robust filtration system than those of you that don’t, and there is a reason for this. Think about what seeps into the soil around us each and every day? Pesticides from farm land or even your own garden can contaminate the water leading into your home. Paint thinners, gasoline additives and all manner of other chemicals can also make their way into your system.

Of course, there are very strict codes to be followed in the US when providing drinking water to any building, but because some contaminants are in such small quantities they can still get into your supply.
Manufacturers that design water filters make sure the water that comes out of your faucet is free of these. 

We also distribute the C-50/60 and C600 commercial and industrial distillers that are suitable for Offices, Hotels, Restaurants, Hospitals, Factories etc. where the security of the drinking water is vital to maintain a constant supply of pure clean water at all times.Just like the question about the question of what the difference is between a softener or filtration system is something I come across a lot, and you can be forgiven for not quite understanding which type will work best for you.

Throughout my website I have done my best to offer the best reviews on what I believe is a good cross section of both water softeners and filtration systems. However, I’m not just about giving you the opportunity to find a product that will end your “in-house water woes”, I’m also about making sure you’re armed with all the information before you hit a purchase button. For that reason, in the following few words I’m going to explain the difference between both systems and who they might suit best.

Pure drinking water, without harmful substances, must be accessible to everyone. The AquaTru is the only water filter that removes up to 99% of all harmful substances from your tap water. The result: pure water with a delicious, soft taste. All you need is an outlet and the will to live healthier today!

Well, as usual I leave the choice up to you. There are water filtration systems on the market (like the one mentioned above) that will reduce the amount of calcium and magnesium from your water, so it will make it softer. If you don’t have a problem with hard water, perhaps a filtration system will work best for you and make water from your tap drinkable again.

UAE and Germany Metals scrap engages
in buy and sell of used Laptops and trading in scrap
parts of all kind of Metals commodities such as Computers,
Laptops,Printers,Copy Machine, Copper,Aluminium, Brass,Nickel
Alloy, Steel, UPS ,Battery, A/c and  Tubes UAE , Sharjah , Ajman,Dubai,
Ras al-Khaimah ,  Elain , Abu Dhabi and Holzkirchen ,München , Rosenheim .Berlin and All in Germany . Thanks.

Used And Scrap Motors Buy And Sell

Used And Scrap Motors Buy And Sell

Contact No +971-55-1716233
+4915217797651 WhatsApp 

         

        Scrap Electric Motors We Buy

There are a wide-variety of electric motors available but some of the ones we recycle include:

• Washing machine motors
• Alternators
• Starter motors

How To Sell Scrap Electric Motors

Where Can Electric Motors Generally Be Found?

When referring to electric motors, we are talking about any motor used in any item to provide power. This can range from household items such as washing machines and microwaves through to car engines and alternators.

You will find a wide-variety of metals being used in electric motors and you can usually use the colour to identify what you have. Most popular, is the silver electric motor which is most commonly made from aluminium. The components within a motor are usually copper although sometimes you will find aluminium inside as well.

If you work with cars or in industries such as heating, plumbing or electrical it is likely you will come across a wide variety of electric motors. In addition, building tradesman and hospitality suppliers will also find a large stock available.

Where Can I Scrap Electric Motors?

We have one scrap yard in Portsmouth and another close to Southampton and Winchester in Bishops Waltham. Taking your scrap electric motors directly to a yard will enable us to check the quality and weight before offering you a price on site.

We also offer a collection service for larger quantities of scrap metal. Give us a WhatsApp +4915217797651 to discuss the scrap metal collection service in more detail

Used Laptops Batteries Buy & Sell

Used Laptops Batteries Buy & Sell

Instead of throwing your dead laptop batteries in the garbage and contaminating the environment or trying to find a safe electronics disposal site for them, I'll give you $ for EACH OF YOUR DEAD BATTERIES! That's right! Just text me at ........... with your address and I'll happily come to your door and pay you for each of your batteries. Don't worry if you only have one...which most people have anyway...I'll take it! I'm local...don't be misled by my cellphone number! Give me a call! Thanks for reading!

This guide will explain the basics of Lithium Ion battery technology and the criteria that should be considered when purchasing a used battery for your laptop computer. The basic information regarding Nickel Metal Hydride (NiMH) and Lithium Ion (Li-Ion) batteries is the same for all laptop computers. Buying a used laptop battery can be a great bargain or a terrific waste of money. Take a few moments to educate yourself on Lithium Ion batteries and the information that should be in a battery listing before purchasing a used battery. 
Lithium Ion batteries have become the preferred power source for most current laptop batteries. Older laptops used NiCad batteries, and more recently laptops have used NiMH batteries. This guide will primarily discuss Li-Ion batteries because they are the predominant  battery technology for current generation laptop computers. 
Li-Ion batteries combine the best qualities of alkaline batteries with the best qualities of rechargeable batteries. Li-ion batteries provide constant voltage during discharge and do not suffer from the memory effect that plague Ni-Cd batteries. Li-ion batteries also provide the highest available energy density of any available battery technology (i.e. provides more power per ounce as compared to NiMH or NiCad) Li-Ion batteries also have a low self-discharge rate (about 5% per month) compared to Nickel Metal Hydride (about 30% per month) or Ni-Cd (about 20% per month). A little known characteristic of Li-Ion battery technology is that Li-Ion batteries lose approximately 15% usable capacity each year (depends upon storage temperature). Because of their characteristics, Lithium Ion batteries can operate for between 300-500 cycles and last for about 5 years from the manufacture date. 
Many Li-Ion batteries have a set of built in LEDs to determine battery charge status. Just push the button and you can readily determine the charge state of the battery. The LEDsDO NOT provide any information regarding the health (or capacity) of the battery. It only indicates the battery's charge state. If the battery only holds a 360 mAH charge, all the lights will illuminate, but the battery only may only have 10% of it's original capacity. 
An average laptop battery operating time is a tricky number to accurately quantify. Battery operating time is dependent upon power settings selected by each individual user and the processor speed. A battery that operates for 2 hours on one laptop with maximum energy saving options selected (e.g. dim screen, reduced processor speed, disk spin down, etc.) may only operate for 1 hour on the same laptop with no energy saving features selected. 
A simple test that I use for determining battery capacity is to play a DVD. This is the most energy intensive test that you can perform on your laptop. I usually set up this test with all energy saving features disabled (disk spin down = off, full bright display, processor performance = highest, no sleep, etc.) This provides the worst case scenario. Normal operating conditions will usually be better than my test conditions. I would rather have a customer get a battery that was tested to operate for 90 minutes and actually operates for 2 hours (under normal conditions), than for the customer to get a battery that only operates for 1 hour. 

Computers Scrap Buyer

We're a Moroccan company looking for e-scrap materials for sale (Huge quantities): - Phone chips (scrap cards from phones) - server and desktop motherboards - Laptop boards - Ceramic CPU - RAMS - Network boards - Video Boards - Black ground panel etc...   Please contact us at: 

11 processors with gold tips and 14 ram sticks with gold fingers. Total weight is 1 pound 3.9 ounces. Recovered from scrap computers. This is for scrap only, as I don't know if any of them actually wo

Item Category	Computer Scrap
Date Posted	November 24, 2017
Offer Validity	February 22, 2018
Price Terms	FOB
Quantity	1bl tonne
Payment	T/T
Shipping	Railway
Address	N/S
Region	Alderney

2017

Selling Scrap Circuit Boards and Other E-ScrapJ s computer Scrap Store has four locations in the USA New Hampshire, Arizona, Georgia and North Carolina and we Sell MOST E-waste and ALL Non-ferrous. Board Prices are based on the delivery to my dock in Manchester New Hampshire 03103.

WE HAVE VERY HIGH YIELD GOLD RECOVERY CPU CERAMIC PROCESSOR SCRAPS AND COMPUTER MOTHERBOARD SCRAPS FOR SALE 1-Gold Top Cpu...2-Gold Top&Bottom Cpu..3-Intel 186/286/386/486/Pentium/Pentium Pro/i860/960/...4-Cyrix486/586/MIIIBM486/586/686/ ..5-RAM (memorys)... We can supply on monthly basis around…

Used And Scrap Batteries Buy And Sell

Used And Scrap Batteries Buy And Sell

I mostly got these batteries by seeing and asking for them. New cars wreck batteries pretty quick because the car computer never really turns off. So if the car isn't driven regularly it'll over-discharge and sulfate the battery.

 They give me their dead batteries also.

I picked up a few behind service stations and parts stores where people had orphaned them. A few came from my marina next to the dumpster, more came from the marine supply store. I told them I was experimenting with desulfating batteries and they told me to help myself to their scrap pile. Some came back to life from various magic treatments and I gave them to friends or built them into projects.

I finally got around to taking the bad ones to the scrapyard and damn! 
Here's what the robo-cashier at the scrapyard gave me for my load of toxic waste!
Batteries are worth real money now, if you can find the right buyer.

 Contact No,+4915217797651
The market goes up and down. Right now the dollar is low and China and India are buying scrap like crazy to sell it back to us as products. That drives up scrap values. Our military shooting and attracting bullets all over the world doesn't hurt the value of lead either. Check the values online or in your paper, if it has a commodity markets listing.
You'll get less than this, because you're not selling a train car full. Unlike retail economics, in collection economics smaller quantities are worth less per pound.
If you're in a city with a port that ships to China, expect to get a higher price than elsewhere.
If you have a huge quantity, bargain up for a higher price. The yards that load ships won't usually bother with you unless you've got truckloads, but if you do, they'll pay accordingly higher.
"TL" means "Truck Load". "LTL" means "Less than Truckload".

If you run into a scavenger with a truck or a shopping cart full of cans, ask them what the best places are to sell different kinds of scrap. 

Now call those places, other local scrapyards and recyclers and ask them if they buy what you have and how much they pay.
Within 5 miles of me (and the port of Oakland) I heard prices ranging from 
"No", a battery", "fifteen cents a pound" and "twenty cents a pound". 
They're allowed to offer you whatever they want. It's a business and they have expenses.
They'll ask you how much you have. If you say you have more, they may offer a better rate.

Stop at the scrapyard office and ask them what to do. We waited in a line of other trucks for a while til one of those guys told us that since we just had batteries, we could drive right in. 

Once inside the yard, they had us load our batteries on a cart, push the cart onto a scale. 
They asked me for ID, my address, and had me sign a form promising that I was the lawful owner of the stuff I was selling them. There's been a big problem in the city with "copper miners" stealing metal wires, pipes, etc. to recycle for money, so there's a law requiring this form. 
Then they printed me a reciept with a barcode at the bottom. 

"Behind the woman in yellow is a little room like a closet. Scan the barcode there and the ATM will give you your money. You'll get the dollars, but you won't get the coins." 

Here's the ATM, and the sign saying that they'll write you a check for the coins if you really want them to. 
I hadn't looked at the reciept, so I was pretty amazed when hundred dollar bills started spewing out of the machine. I guess those batteries weighed more than I thought they would.

I was very surprised, and pissed, to find how very little I was being given to current, soon to be ex, battery buyer. I don't mind someone making some money, but I don't like getting ripped off. And docking  for batteries with a brake in the side of it, called three different buyers yesterday and none of em did that either.Scrap yards usually won’t accept other types of batteries, as they are too difficult to scrap. On the iScrap App you can locate and contact scrap yards anywhere in your area and get the latest battery prices for your batteries for scrap. Scrap yards generally do not want lead battery that are leaking or may have the potential to break open so they can maintain a safe working environment.

Car and truck batteries normally weigh between 30 and 75 pounds and are always a great way to make a couple of extra dollars when you are going to cash your material in

Used Compressor And Scrap Compressor Buy And Sell

Used Compressor And Scrap Compressor Buy And Sell

Refrigerant flows through the compressor, which raises the pressure of the refrigerant. Next the refrigerant flows through the condenser, where it condenses from vapor form to liquid form, giving off heat in the process. The heat given off is what makes the condenser "hot to the touch." After the condenser, the refrigerant goes through the expansion valve, where it experiences a pressure drop. Finally, the refrigerant goes to the evaporator. The refrigerant draws heat from the evaporator which causes the regrigerant to vaporize. The evaporator draws heat from the region that is to be cooled. The vaporized refrigerant goes back to the compressor to restart the cycle.

I am new to the forum and I love the place already. Really useful information from very nice people ... 
I am getting started with recycling and have some questions, I still haven't been able to figure out clearly, please guide me ...
1) What sort of compressor have copper and what have Aluminum ? 

I read somewhere that the smaller ones 8,10,12 lb have Aluminum and Larger Ones 20,24,26 lb have Copper
Someone else told me the 110 V are Copper and 220 V are Aluminum ...
Is there any reality to this ? How do you judge which ones would have copper ? Is there a way to tell / estimate without opening / cutting ?
2) What is the average amount of Copper in a Compressor ? 5% ? 6 % ? 10 % ?
Say if I have a compressor weighing 10 lbs, how much is Steel, How much is Copper and How much is Oil ? 
3) What is the difference between Oil and Oil Free ? Is the make different ? Does one have more copper than the other ?
4) At what price do the scrap yards sell these compressors sealed units ?
Any help would be greatly appreciated. Thanks in anticipation.

Contact No. WhatsApp +4915217797651

Hello! and thanks for the great question! I’m glad you like by blog, and I hope you keep reading! With that being said, here is the deal with refrigerators:

The problem with refrigerators is the refrigerants, aka freon. Some people have the illusion that it is like breathing mustard gas, which couldn’t be farther from the truth! Freon is not that bad for people to breath. Yes, it isn’t good to breath, but it isn’t any worse than second hand smoke; so don’t worry about getting hurt if you break the freon lines.

The real concern with freon is its detrimental effect on the ozone when released. IF you are EPA certified, and you have the necessary equipment, only then can you legally pull the freon out of any scrap appliance, including.

Now the question most important question you can ask yourself is “Do I want to unsafely let freon out into the atmosphere?”

If you do, and get caught by the EPA, then you will have to pay a serious fine; Over $25000. (I haven’t heard of somebody getting into trouble for this while scrapping… yet.)

The freon lines are the copper lines in the bottom and back of the refrigerator, and the black condensor/evaporator coils. If you cut one of these lines with a bolt cutter, the refrigerants will come pouring out of them, along with some of the lube/oil from the compressor. If you cut the lines, you will buy cheap paroxetine online want to have the fridge in a place where you can let that oil pour out if it decides to. Then harvest the copper lines… The condenser coil is usually made of something other than copper, but check that for copper too (sometimes aluminum).

Inside of the compressor (the hollow black steel ball) is a motor with some copper windings, and a whole lot of oil. If you have the will power, take an angle grinder, sawzall, ect, and cut that sucker open along the welding joint. Sell the motor as is, or cut out the copper for scrap. If there is any non-magnetic stainless on the refrigerator, pull that off. I have found on occasion the inside of the refrigerator (the rails and shelves) to be aluminum  . Pull those it. Any wire you can manage to find should get cut off too.

My scrap yard, and possibly yours too, will take all refrigerators with the freon still in them. In that case, take anything valuable that you possibly can off the refrigerator without breaking the freon lines. This just makes for a cleaner work space, a cleaner environment, and cleaner conscious. If your scrap yard will NOT take refrigerators with freon, you will need to make a decision. You can cut the copper tubing lines, and possibly get a fine (I’ve never seen anybody get a fine, however), or you can call around to other scrap yards… In my experience, they will usually buy it when you bring it in, but not if you ask over the phone. The most time-consuming, but most profitable option, is to see if it works and sell it as a used fridge! Plug it in and see if anything is wrong. If not, you can always try to sell it on craig’s list. In almost all of my experiences, however, there is something seriously wrong, and its only value is scrap. Remember, that if you can sell it along with the mixed metal, to fill the inside with metal too. That way the refrigerator won’t take up too much volume. Thanks for the question and Good Luck Scrapping! If you or anybody else has any questions, and you think I may be of assistance, please ask!

Used Generators Buy And Sell All Category

Used Generators Buy And Sell All Category

Contact no. +04915217797651 WhatsApp 

We have a large range of used generators both diesel and natural gas. Our generators range from 6kVA up to 2500kVA. These are high quality diesel and gas generator sets from recognized names in power generation including: FG Wilson, Caterpillar, Cummins, Olympian, SDMO and more.

Available second hand generators include open and silent / enclosed (ISO containerized or canopied) gen-sets with alternators by Leroy Somer, Newage, Mecce Alte. Our used generators can be configured for standby, primary or continuous supply. We also stock genuine FG Wilson parts, external fuel tanks, plugs, distribution boards, sound attenuated enclosures, acoustic containers and more. Maintenance agreements also available upon request.

All prices shown below are excluding carriage and VAT. Carriage can be arranged as an additional extra.

We stock new and used diesel/gas generators and we can supply rental sets for all your power needs.

SDMO 700-770kVA / 560kW generator with MTU 12V 2000 diesel engine. Comes fitted inside a white trailer mounted 20 foot ISO container. 
Leroy Somer 49.1/M6C6S/4 415V, 1010 amp, 50 Hz alternator (please see data sheet). Complete with roof box style exhaust system, four 12 volt lead-acid batteries and a Kerys control panel.
This generator can be sold with a warranty included to meet your needs.

We offer a full installation service with supplied auto change over panel for 100% automatic standby applications. 
This unit is sound level attenuated to 75dBA @ 7 metres. These ISO type containers are also highly secure. This Generator is up for sale after a long period of standby rental, however it has less than 4500 hours usage (please see data sheet).

This Cummins 1100kVA / 880kW generator operating with a Stamford 400-230 volt, 1530amp 50hz alternator has a Cummins QST30-G4 diesel engine and was manufactured in 2012 with the recorded run hours of 10,000.
The set has a Deep Sea LED control panel and a 3200l fuel tank and is in an ISO container and sound attenuated to 80dba @ 1 metre.
The exhaust system is roof fitted and there are two 12V lead-acid batteries. Length 10,000mm, Width – 2,400mm, Height 2,500mm(ex-cl exhaust), 2,500 (inc exhaust).
The generator was used as a prime power unit in a grinding Mill and is no longer required as a new power supply has been connected. This set has been run for 40 hours per week with servicing from a Cummings dealer at 250hour intervals.
In good condition this set is sold with a standby 6 months or 150 hour UK warranty whichever is soonest.

This CHP unit includes a Cummins 1547kW / 1934kVA, 415V, natural gas generator. Includes the heat exchangers, power and valves. 
We are offering a new reduced price as shown which removes the smaller container with the heat recovery equipment. If you need this the cost is £5,000 with the package the price is £150,000.
The exhaust system and dry air coolers are mounted on the roof of the shipping container this allows relatively straight forward removal and installation at another site. 500 litre lube oil top up tank and heat exchangers are included.

The system is mounted in two containers (a 6mtr and a 12mtr). For exports a third container will be needed for the exhaust and heat exchanger. The engine is in good condition and has been well maintained. 
Suitable as an anaerobic digester plant, These are valued at £560,000.00 new. This unit was previously used for the purposes of green house heating. Viewing of the unit is welcome and we can provide this unit to you with minimal delay should you have a similar machine go through a costly breakdown. 
We offer a 12 month warranty on this system for PLC companies and also UK Government organizations subject to the reapplication of it.
Manufactured in 2002 the total running hours are 10,100.
Was used for STOR and heating water for overnight greenhouse heating whilst not running.
‘We can also consider a rental/hire project or joint ownership for anaerobic digester plant and STOR projects so please get in touch with any interest. 

These Caterpillar 1875kVA / 1500kW diesel generators have a 400 volt, 50Hz 2606 amp SR4 alternators. 

The sets are fitted with Caterpillar 3516B TA engines that have had 6,830 / 5,780/ 5,780 hours of use, internal exhausts, 4 x 12 volt lead acid batteries and water jacket heaters. 
The Generators have the following dimensions 12,000mm long, 2,400mm wide and 2,900mm tall including exhaust (approximately) and weigh around 25,000Kg. 
The control panels are Caterpillar. 

These sets were used as National Grid back up set as standby to base load landfill gas sets. So these sets were used when the gas sets were being maintained. Outside was weathered hence re-spray - inside will be full cleaned after testing. These generators operate individually or as 3 units producing 5625kW prime power 5.6 mw to the grid. Their location was on a large PLC landfill site so their present external colour is Holly Green however given its weathered dull appearance we will grit blast prime and paint sets ral 9001 with new fittings as required. Our scope of works given their low hours and Quality will be to resell these generators with warranty to a STOR or PV-Photovoltaics operator / owner to operate a grid connection. Alternatively these would be ideal as standby sets at data centres - cold stores or factory sites. If used in the Export Market, similar projects we have to sold to include Deep Mine operators in South Africa. Whatever your UK project we can work with you a deliver a quality product.

Copper,Iron,Aluminum,Brass,St steel Buy And Sell

Copper,Iron,Aluminum,Brass,St steel Buy And Sell

While some locations where you can find scrap are fairly obvious, there are also sources that many novice scrappers might not consider. Remember that only 30% of scrap metal is currently recycled, so a lot of material is still urgently in need of recovery. Whether winning the more visible material or tapping into those otherwise unnoticed sources, the secret of making a profit with scrap metal is to establish a regular supply.

We’ve all seen those hideous statues hidden in our garage or basement that someone thought would make the perfect lawn ornament or living room décor.  Unfortunately they thought wrong which is why it luckily landed in your possession. Don’t frown every time you go to Spring clean your garage at the little copper gnome smiling up at you.  Go ahead and cash it in as scrap copper! You’ll breathe a lot easier – unless the Mrs. catches wind of it and you didn’t ask first!When you are searching for all types of metal to bring to your yard, copper is usually one of the most common metals that scrappers are looking for. Not only is it worth a lot of money, but it is common in a lot of different places you can find scrap copper. Below we list some of the common places and appliances you can find copper.

Iron, WhatsApp +4915217797651

 

I've been experimenting with metal scrapping lately. I have a day job so I am considering this to be more of a "hobby". It started when I went for a walk near my office during lunch time and found dozens and dozens of old and new soda cans in a nearby wooded area where people seem to have been dumping trash for millenia. Over a relatively short period of time I was able to collect there in other similar areas about $40 worth of cans. Not much, but not bad either, considering that I am not planning to make it my day job. Anyway, now I want to see if I can expand this to other types of metals, but to make it as profitable as possible without (i) spending huge amounts of time and gas or (ii) turning my backyard into a scrapyard. I don't have a truck, just a station wagon, and I don't have hours to spend driving around looking for scrap. I do, however, occasionally see some stuff sitting at the curb in our neighborhood on a trash pickup day. I also take apart computers and computer components. 

I guess this rules out steel and anything bulky regardless of what it's made of. Instead, I should be looking for copper, brass, and aluminum.
What I am looking for are resources, hopefully in one place, that would describe what type of "expensive" metals can be found in what common types of things people throw away. For instance, does a simple lawnmower contain anything other than steel parts? If I take apart a desktop computer, are there any types of cables that are worth salvaging? How much work is involved before I can take something to a scrapyard? 
I don't know if it's realistic to expect a single resource covering all these questions, but in any case, I'll appreciate any help!

 Aluminum
Some more common sources are frames of lawn chairs, beverage cans, storm door and window frames, disposable turkey and pie pans, foil, etc. The second type of aluminum sources are referred as extruded aluminum (as opposed to cast aluminum) because of the way the products are produced.

Where to find scrap aluminum? As a scrapper, the top two things that probably come to mind when discussing aluminum is either foil or soda cans. Small aluminum items are found here and there throughout the day but like copper, the chances of finding a pile of aluminum at every stop is slim. Within this article on where to find scrap aluminum, I want to tell you about a few locations that you typically wouldn’t consider being a great source for scrap aluminum.One of my first suggestions on where to find scrap aluminum is to contact all of the churches and local halls in your area. Churches have dinners or potlucks all of the time. Halls offer people a chance to host their own wedding, baby shower, cabaret and so forth. The thing that both locations have in common regardless of the type of event taking place is food.

 Brass
Finding Brass to scrap is easy if you know where to look. With
brass being one of the higher paying scrap materials, finding scrap Brass in
New Jersey can be tricky. When you are
scrapping any type of metal it is important to think outside the box. One
important factor is maintaining relationships with small businesses. Also be
sure to keep an open mind, there are plenty of different materials that can be
scrapped. Contact local business owners and contractors to offer

free pick up services and also hand out business cards to local supply shops.
Talk to a manager or owner about free removal of parts and materials they no
longer need like furnaces and water heaters or even small replacement parts
that they can not sell.

Craigslist is a very good place to find almost anything for free or a low price. Search through some ads and negotiate with people to make the most money from other peoples junk. Things like door knobs, brass plated silverware and plates and old bed frames will usually be made of brass. Again, keep your eyes peeled for anything else that can be scrapped. Anything that will have aluminum, copper, brass or steel can be scrapped for cash.

Finding brass shells at shooting ranges is easy with
approval from a manager. Contact local ranges to find a good time to come in,
usually before closing time or early in the morning. By offering to pick up
brass shells for free, you will be saving the ranges from paying additional
employees. Be sure to remove any primer on the brass shells before scrapping them. 

scrap materials. Before you start digging into piles of

goodies make sure you ask home owners and especially companies. Places like
pawn shops, repair shops, auto shops and appliance stores may be your best
choices for dumpster diving. Don’t forget to keep your mind open; things like
computer parts, wires and electronics can also get you money at the scrap yard.

 St steel

 Iron and steel scrap is a vital raw material for the production of new steel and cast-iron products.   The steelmaking and foundry industries in the United States are highly dependent upon the ready availability of scrap from manufacturing operations and from the recovery of products that are no longer used or needed.   The steel industry has been recycling steel scrap for more than 150 years.  

Steel scrap recycling conserves raw materials, energy, and landfill space.  The domestic steel industry recycles millions of metric tons per year of steel cans, automobiles, appliances, construction materials, and other steel products.  The primary source of obsolete steel is the automobile.  The remelting of scrap requires much less energy than the production of iron and steel products from iron ore.  Consumption of iron and steel scrap by remelting reduces the burden on landfill disposal facilities and prevents the accumulation of abandoned steel products in the environment. 

CMC Recycling in Independence is a full-service metals recycler that welcomes all commercial and industrial businesses, brokers, dealers and individuals looking to sell their scrap metal.  We work closely with each of our customers to determine your scrap management requirements and how best to serve you. We develop effective solutions to streamline your day-to-day commercial/industrial scrap metal management, and optimize the value of your scrap metal.

CMC Recycling offers a variety of services for all of our customers, including roll-off and flatbed service, certified weights, and a caring, knowledgeable staff ready to help you implement your scrap metal recycling plan.

As a publicly traded company we are held to a standard of business practice significantly higher than others in our industry. CMC prides itself on its integrity, we expect our customers to hold us to an even higher standard, and we strive to live up to our customers’ expectations. At no cost to you we will perform an analysis of your current commercial/industrial scrap recycling process and let you know how it can be improved.

OLD STOCKS USED SPARE PARTS AND SCRAP BUYER

USED SPARE PARTS AND SCRAP BUYER

All scrap metal dealers will need to apply to their local council for a licence to operate under new rules which come into effect today  .The Scrap Metal Dealers Act 2017, which clamps down on rogue traders, will also give local authorities and police new powers to inspect premises where they suspect illegal activity.

Compressor Scrap and Motor Mix Scrap suppliers who are looking for genuine scrap buyers can contact us with your scrap details. We are in need of 50MT of compressor scrap and 50MT of motor mix scrap on regular monthly basis. We afford best competitive price for your best quality scrap. Interested scrap suppliers can contact us.Today marks a very significant milestone in the fight against metal thieves

The Act demands a greater level of awareness and responsibility from traders, ensuring they verify who they are doing business with, but it also protects law abiding recyclers from unscrupulous traders.

It is vital that scrap metal traders are aware of the changes, including the new licensing regulations.

Metal thieves cause misery for thousands of people, whether targeting the rail network, power cables or telecommunications and today’s changes signal the introduction of a more robust licensing scheme to be monitored by local authorities.

• All scrap metal dealers can apply for a licence from 1 October.
• If a scrap metal dealer who is registered under the Scrap Metal Dealers Act 1964 or Vehicles (Crime) Act 2001 applies on or before 15 October they will be deemed to have a licence until the local authority issues a licence decision.
• Local authorities will complete checks to assess applicants’ suitability to hold a licence between 15 October and 1 December.
• If a registered scrap metal dealer does not submit an application on or by 15 October their deemed licence will lapse on 16 October. A deemed temporary licence which has lapsed does not give rise to a right to appeal. The dealer must submit an application and wait for a licence to be issued before they can trade legally.
• A local authority can impose conditions on a deemed temporary licence pending an appeal for the refusal of a licence.
• Scrap metal dealers who are not registered under the Scrap Metal Dealers Act 1964 or the Vehicles (Crime) Act 2001 can apply for a scrap metal dealer’s licence from today 1 October but must wait for a licence to be issued before they can trade legally.
• The offence of buying scrap metal for cash comes into force on 1 October.
• Local authority officers and police officers will have the right to enter and inspect from 1 October.
• The majority of the other enforcement provisions within the Act will come into force on 1 December.

Used Mobile And  Scrap Mobiles Buy And Sell.